Cast Iron Y Strainer
Cast iron Y strainer is a device on the transmission medium pipeline, usually installed in the pressure relief valve pressure relief valve fixed water level valve or other equipment inlet end, used to intercept impurities in the medium, to protect the normal use of the valve and equipment
Product Introduction
Introduction:
Cast iron Y strainer is a device on the transmission medium pipeline, usually installed in the pressure relief valve pressure relief valve fixed water level valve or other equipment inlet end, used to intercept impurities in the medium, to protect the normal use of the valve and equipment When the fluid into a certain specification of the filter tube, the impurities are blocked, and the clean filtrate is discharged from the filter outlet, when the need for cleaning, as long as the removable filter out, after treatment to re-load, therefore, easy to use and maintenance.
Application:
cast iron Y strainer is used for pipeline to remove transmission medium: hot water, cold water, steam, compressed air mechanical impurities, is boiler room circulating water pump before all need to install this product, in order to remove mechanical impurities in the system, so that equipment and pipeline from blocking and wear.
Description:
(1) Import and export diameter: in principle, the import and export diameter of the filter should not be less than the inlet diameter of the supporting pump, generally consistent with the inlet pipe diameter.
(2) Nominal pressure: determine the pressure level of the filter according to the maximum pressure that may occur in the filter pipeline.
(3) The selection of hole mesh: mainly consider the particle size of impurities to be intercepted, according to the requirements of the medium process. Different sizes of screen can be intercepted particle size can be directly asked.
(4) filter material: the material of the filter is generally the same as the material of the connected process pipe. For different service conditions, cast iron, carbon steel, low alloy steel or stainless steel filter can be considered.
Specification:
Valve Size: |
1"-24" |
Pressure Class: |
10bar, 16bar, 25bar |
Matierials: |
Ductile iron ASTM A536 |
Design and Manufacturing Standards: |
BS5153 |
Face to Face Standards: |
DIN 3202 F1 |
Flange Dimension Standards: |
ANSI B16.1 125LB/150LB, EN 1092-2 PN10/PN16/PN25 |
Pre ssure Test Standards: |
ISO 5208 |
Quality/Product Certifications: |
CE, ACS, WRAS, TS... |
Process Connection Types |
Flanged, welded |
Applicable medium |
Fresh water, sewage, sea water, food, medicine, all kinds of oil, etc |
PACKING&WORKSHOP
APPLICATION
FACTORY
You Might Also Like
Send Inquiry