51³Ô¹ÏºÚÁÏ

Introduction:

Wafer type tilting check valve refers to a valve with a disc opening and closing member that blocks the backflow of the medium by the action of its own weight and medium pressure. Automatic valves, also known as check valves, check valves, return valves and isolation valves. The disc movement is divided into lifting and swinging. Lift check valves are structurally similar to globe valves, except for the valve stem that drives the valve plate. The medium flows in from the inlet side (lower side) and flows out from the outlet side (upper side). When the inlet pressure is greater than the sum of the weight of the disc and the flow resistance, the valve opens; otherwise, the valve closes when the medium returns. A swing check valve has a disc that tilts and rotates about its axis, and works similarly to a lift check valve.

Application:

Widely used in petroleum, chemical, metallurgy, thermal power plants and other industries.

Description:

The main advantage of the inclined splint check valve is to overcome the impact of the swing check valve lift check valve in the case of impact water hammer, the operation of the eccentric disc without collision. The valve seat and the sealing surface are gradually closed and contacted, and there is no impact and no working noise. Miniature elastic metal valve seat, good sealing performance, butterfly valve design, sensitive switch and long service life. The swash plate decouples the streamlined fluid channel, with low flow resistance and good energy saving effect.

Specification:

PACKING&WORKSHOP

APPLICATION

FACTORY